HB-2006 ICU Electrical Patient Bed

Description:

HB-2006 is designed for the ICU patient and improving patient safety. Multifunction: CPR release-head section / In-bed scale (weighting alarm) / Trendelenburg / Reberse Trendelenburg / Nurse call / Night Light / RS-485 communication port / Patient control panet, etc.

Specifications:

• Bed length: 2270 mm
• Overall width of the bed: 10700 mm (Handrail standing); 940 mm (Handrail folded)
• The width of the sleeping surface: 908 mm
• Low position: 480 mm (Diameter of the Caster - 150 mm)
• High position: 760 mm
• Head section: 0-85°
• Knee section: 0-45°
• Trendelenburg/Reverse Trendeleburg: 17°/17°

HB-2001 AE & A Electric Patient Bed

Description:

Lowest bed design, convenient for elder and postoperative patients to get on/off bed. 24V DC morot-CE mark, quiet and stable. Equip with power storage function (9V/24V optional). ABS Head & Tail Boards. Easy to remove as CPR back board for emergency.
Bed is designed for tilting function to meet with the special requirement of ICU. ABS sleeping surface plates with 4-sections. Easy to remove and clean.
Reinforced metal frame with epoxy powder coating.
Foldaway handrails with function of preventing clipping fingers and positioning the mattress when the handrails are folded.
Equip with tabletol table which can be placed into the tail board or under the bed.
Flexible I.V Pole, height can be adjusted up to 700 mm.
High stability and quality 5" casters with the pedal brakes system on the opposite wheels.
8 holes for I.V Pole and 4 pothooks for drainage bag. Protective bumper designs on 4 corners of the frame. Standards for HB-2001AE: Extra 2 sockets for controller, central brake casters and four foldaway siderails.

Specifications:

• Bed height range: 430-710 mm (not including mattress)
• Head section: 0-85°; knee section: 0-40°
• Trendelenburg/Reverse Trendeleburg: 12°/12° (manual switchover)

HB-2001-AC Electric Patient Bed

Description:

24V DC motor-CE mark, quet and stable. Equip with power storage function (9V / 24V optional). ABS Head & Tail Boards. Easy to remove and clean. Reinforced metal frame with epoxy powder coating. Foldaway handrails with function of preventing clipping fingers and positioning Central brake 5" casters. 8 holes for I.V Pole and 4 pothooks for drainage bag. Protective bumper designs on 4 corners of the frame.

Specifications:

• Bed height range: 430-70 mm (not including mattress)
• Head section: 0-85°; Knee section: 0-40°